How to Track Billable Hours and Turn Them Into Invoices

Updated Nov 21, 2026 · 11 min read · ntimer

Tracking billable hours means separating the work a client pays for from the work they do not, applying one rate and one rounding rule to every entry, and turning the result into an invoice that carries the particulars the law expects. This guide gives the setup, a worked calculation, what an invoice must show, the mistakes that cost freelancers money, and how to bill time an AI agent spent on a client's code.

What are billable and non-billable hours?

Billable hours are the hours you can charge a client for because they pay for that work. Non-billable hours are everything else: invoicing, sales, learning, internal tooling, overhead. Toggl's guide draws the same line, counting client matters such as research, drafting and planning as billable and internal matters such as practice meetings, personal and client development, and office management as non-billable [5].

Where freelance and developer hours usually fall
Usually billableUsually non-billableDepends on the contract
Code for a client, a code review, a design meeting, a deployment you were asked to doInvoicing and chasing payment, learning a new framework, internal tooling, your CVHandover calls, bug fixes in a product you maintain, training a client's team

The third column causes arguments, because the contract decides it, not the mood of the day. If your agreement says maintenance is included in the monthly fee, a maintenance fix is not billable time; if it says support is billed hourly, it is. Write the classification into your contract, and the disputes disappear.

Track non-billable time too, for your own sake. A week with 30 billable and 18 non-billable hours tells you the real price of your work, and that is the number you need before you raise a rate.

How do I set up billable hour tracking step by step?

Six steps get you from nothing to a timesheet you can invoice from: list clients and projects, set a rate for each, decide how you record time, choose a rounding rule, log non-billable hours too, and test the whole thing on one week before you bill.

  1. List the clients and their projects. One entry per client, projects underneath. Three projects on one client need three rate lines, because the work differs.
  2. Set the rate for each one. Hourly, daily or a fixed project fee. Put the rate next to the client in your tool, so the invoice is a calculation and not a memory test.
  3. Decide between timers and manual entries. Timers capture the work as it happens but also capture the coffee break; manual entries are more accurate but written from memory the same evening. Most people run a timer for live work and add a manual entry for the twenty minutes of reading they did on the train.
  4. Choose a rounding rule and write it down. Tenths, quarters or exact minutes, decided before the first entry rather than after the client questions the invoice.
  5. Log the non-billable hours too. They are not billed, but they are the only honest picture of your week, and they feed the rate you quote next time.
  6. Run one week and check it. Compare the totals with your calendar and inbox. If a client is missing or an entry lands on the wrong project, fix the setup before you invoice anyone.
Rate profiles, the worklog and one work per client

In ntimer, a client or project is a work in a tree, and every session lands in that work's worklog. Rate profiles hold the hourly rate per work, and Free plans include three, enough for a one-client start. Sessions are saved on the device first and synced later, so tracking works offline and no hour is lost when the connection drops.

How should you round billable hours?

Round to the smallest increment that still feels fair, and apply the same rule to every entry. Toggl's guide notes that law firms and government departments commonly bill in tenths, which split each hour into ten six-minute increments, while some companies bill in quarters [5]. Tell the client which rule you use before the first invoice.

Common rounding rules
IncrementHow it worksGood forWatch out
Tenths (6 minutes)Each hour is ten increments; 34 minutes bills as 60% of an hour [5]Law firms and government work [5]Finer increments mean more administration
Quarters (15 minutes)Each hour is four increments; 34 minutes bills as 0.75 [5]Retainers with a fixed scopeA ten-minute call can cost a quarter hour
No roundingThe exact minute is billedHourly work with a trusted clientHarder to check and harder to invoice

One rule above all: never round up every entry. Toggl warns against padding hours, claiming more work than you did, and recommends smaller increments to give clients better value [5]. Rounding up a 34-minute entry to 40 minutes is a decision you make once, in writing, for every entry.

How do you calculate billable hours and the amount to invoice?

Billable amount equals billable hours multiplied by the rate, applied per client or rate profile, and your rounding rule decides which hours count. In the example below, a developer bills three entries at 95 EUR an hour with a six-minute tenths rule: 5.3 billable hours worth 503.50 EUR.

Worked example: one client, one week
DayWorkRaw timeBilled (tenths)RateAmount
MondayAuth bug fix, review included1 h 42 min1.7 h95 EUR161.50 EUR
TuesdayAPI endpoint and tests3 h 05 min3.1 h95 EUR294.50 EUR
ThursdayCode review for the client's team28 min0.5 h95 EUR47.50 EUR
FridayAdmin, invoicing, mail55 minnot billed--
Total5 h 15 min5.3 h503.50 EUR

The rounding added 3 minutes to a 5 hour 15 minute week: 5.3 hours billed instead of 5.25. That is normal, and it is why the rule belongs in writing before the first entry. Repeat three steps every month: total the raw minutes per client, round them by your rule, then multiply by that client's rate.

Keep the calculation auditable. If a client asks why the invoice says 5.3 hours when the timesheet says 5 hours 15 minutes, the answer is one sentence about a rule you both agreed to, not a debate.

How do you turn tracked time into an invoice, and what must an invoice show?

An invoice is the request for payment, and it has to carry specific particulars. The European Commission's VAT invoicing page lists what a full VAT invoice must contain: a sequential number, both parties' names and addresses, the customer's VAT number where the customer owes the VAT, a description and quantity, the net unit price, the VAT rate and amount, and the date [1].

The UK government's page for invoicing customers lists the same essentials in plain language: a unique identification number, your company name, address and contact details, the customer's name and address, a description of what you are charging for, the date the service was provided, the date of the invoice, the amount charged, the VAT amount if it applies, and the total owed [2].

  • A unique invoice number, so an invoice can be referenced, never duplicated and never paid twice [1][2].
  • Both parties' details: names and addresses, plus the customer's VAT number where the customer is liable for the VAT [1].
  • What you are billing for, with the quantity or hours, so the client can match it to the timesheet [1].
  • The date of issue and the date of supply, which can differ [1][2].
  • The money: the unit price excluding tax, the VAT rate and amount where it applies, and the total owed [1][2].

What you keep matters as much as what you print. UK guidance asks VAT-registered businesses to keep a copy of every sales invoice they issue, even one made by mistake [4], and the IRS says you must keep records for as long as needed to prove the income and deductions on a return, using any system that clearly shows your income and expenses [3].

A tracked-timesheet export is a good attachment, not a replacement: it shows how the hours became the number, while the invoice asks for the money.

From tracked time to an invoice

In ntimer, the worklog of each client or project is the source for the invoice, and rate profiles carry the rates. On Pro you can turn a month into an invoice in EUR or USD and send it by mail, so tracked hours become a document the client can pay without retyping.

What are the most common mistakes when tracking billable hours?

The expensive mistakes are billing time you did not work, mixing two clients in one entry, rounding every entry up, forgetting non-billable hours, starting a timer late, and invoicing hours the client never approved. Each is cheap to prevent once it has a name.

  • Billing time you did not work. The IRS expects you to prove the income and deductions on your return, and records make that possible [3]. A timesheet you cannot evidence is a liability, not revenue.
  • Mixing clients in one entry. Then nobody knows which rate applies. Split it, even if the split is ugly.
  • Rounding every entry up. A rule applied in one direction quietly inflates the invoice; Toggl warns against padding hours [5].
  • Ignoring non-billable time. If you log only billable hours, you lose the denominator, and with it the ability to tell whether a project is worth taking.
  • Starting the timer late. The first hour is the one you forget. A timer you start when you start working is worth more than one you start when you remember.
  • Invoicing hours nobody approved. Send the timesheet before the invoice and let the client flag a disputed line. An invoice that is argued about costs more than the hours in question.

How do you bill time an AI agent spent on a client's code?

Bill it only if the client agreed to it, and show it as its own line. The transparent invoice has three parts: the agent's run time, your review and steering time, and the total. Anything less invites a question the timesheet cannot answer.

Most contracts price a person's time, so an agent line changes the commercial terms rather than the arithmetic. Agree it before the work starts, where you agree the rate, and put it in writing.

Why the detail matters: an agent session can run for an hour while you spend ten minutes steering it, which is the number a client will query. The agentic coding guide covers how agents run and how to measure their time honestly.

  • Give the agent its own timer, one for the session and one for your review, so the worklog shows who did what.
  • Keep the agent's sessions under their own work item, so a client total is never inflated by machine time by accident.
  • Write one line about what happened: which repository, which task, what was verified. A client who reads it stops wondering why the hours look unusual.
  • Decide the rate question up front: a lower rate, your normal rate, or not at all, said before the work begins.

How do you choose a time tracking tool?

Choose on the criteria your work needs rather than on feature count. What matters is whether the tool handles billable rates per client, produces what an invoice needs, records time offline, exports your data, and what it costs when you are one person on a laptop.

What to check in any time tracker
CriterionWhy it mattersWhat to look for
Billable rates per clientRates change, and not all work on one project is billed the same wayA rate field per client with a default. Clockify's pricing page describes setting hourly rates for tasks on a project and choosing which are billable [7]
Invoicing from tracked timeRe-typing hours is where mistakes and unpaid hours come fromClockify describes creating invoices from tracked time and expenses, downloadable as PDF [7]
Approval before invoicingYou should check the hours before they become moneyHarvest lists automatic invoice creation and timesheet approvals among its features [8]
A free tier that suits one personMost solo work starts with one or two billable clientsClockify's own site offers a free start, with paid tiers on top [6][7]
Rounding, offline capture and exportYour rule must match the invoice, and entries must survive a dead connectionCheck that increments can be configured, entries sync later, and you can export CSV or PDF

Three examples, in each product's own words. Clockify says it is a time tracker and timesheet app for tracking work hours across projects, and that you can start for free [6]. Toggl Track describes automatic start/stop timers and manual time entry that build a billable-hours timesheet [5]. Harvest lists automatic invoice creation and timesheet approvals [8].

For one freelancer, a free tracker that exports is enough to start; move to a paid tier when you need per-client rates, invoicing or approvals. If you track on a phone between other tasks, check that entries save offline first.

One criterion is easy to miss: your timesheet should be readable by a client without a tutorial, because you will attach it to an invoice. The Pomodoro technique guide covers the other half of the problem, protecting the hours you intend to bill.

Questions

What counts as billable time for a freelancer?

Billable time is work you can charge for because the client pays for it: code, reviews, design meetings, deployments they asked for. Non-billable time is admin, sales, learning and internal tooling [5]. When it is unclear, the contract decides, so put the classification in the agreement first.

Should I round billable time up or down?

Round consistently rather than favourably. Pick one rule, write it down, and apply it to every entry: tenths of six minutes, quarters of fifteen minutes, or the nearest block [5]. Avoid rounding up every entry; it pads the invoice [5].

How do I bill hours I forgot to track?

Add a manual entry the same day, while you still remember the task, the client and roughly how long it took, and note that it is manual. Batching forgotten hours at month end is where invoices go wrong, because nobody can check them.

Do I need a time tracking app, or is a spreadsheet enough?

A spreadsheet works until the hour you bill comes from a memory rather than a record. Tools differ: Clockify has a free tracker, with billable rates and invoicing on paid plans [6][7], Toggl Track describes timers and manual entries that build a billable-hours timesheet [5], and Harvest lists approvals and automatic invoicing [8]. Pick what fits how you work.

How long should I keep timesheets and invoices?

Keep them as long as they can prove your income. UK guidance requires VAT-registered businesses to keep a copy of every sales invoice they issue, even a mistaken one [4], and the IRS expects records for as long as needed to prove the income and deductions on your return [3]. Keep each timesheet as long as its invoice.

Can I invoice a client for time an AI agent spent?

Only if the contract allows it. Most agreements price a person's time, so an agent line changes the terms and needs agreeing before the work starts. When you do bill it, show three lines, the agent's run time, your review time and the total, and keep the agent's sessions under their own work item.

Sources

  1. VAT Invoicing, European Commission, Taxation and Customs Union. accessed Nov 21, 2026. Back
  2. Invoices: what they must include, GOV.UK. accessed Nov 21, 2026. Back
  3. Recordkeeping, Internal Revenue Service. accessed Nov 21, 2026. Back
  4. Keeping VAT records, GOV.UK. accessed Nov 21, 2026. Back
  5. Billable Hours Chart: How Attorneys Make Billing Increments, Toggl. accessed Nov 21, 2026. Back
  6. Clockify: Time Tracking Software, Clockify. accessed Nov 21, 2026. Back
  7. Clockify pricing and features, Clockify. accessed Nov 21, 2026. Back
  8. Harvest features: time tracking, reporting, invoicing, Harvest. accessed Nov 21, 2026. Back

Related guides

00:00:00

Start the clock.

Start tracking